background image

FCC Warning: 

This equipment has been tested and found to comply with the limits for a Class B digital 
device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide 
reasonable  protection  against  harmful  interference  in  a  residential  installation.  This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures: 

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and receiver. 

  Connect  the equipment  into  an outlet  on a circuit  different  from  that to which the 

receiver is connected. 

  Consult the dealer or an experienced radio/TV technician for help. 

 
Caution:  Any  changes  or  modifications  to  this  device  not  explicitly  approved  by 
manufacturer could void your authority to operate this equipment. 
 
This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the 
following two conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may cause 
undesired operation.

 

Summary of Contents for CommaGlove 1S

















Reviews: