Figure 7 Device Main Interface
VI.
Read Data
You can trigger CommaGlove to read data in 3 ways. If the read process success, the device will emit
a beep sound and a green LED will light 1 time.
a)
Soft trigger by click the “Scan” button (Left-hand side of Figure 8).
b)
Press the power / trigger button on the top of the CommaGlove (Figure 1)
c)
Press the read button via the USB auxiliary trigger (require CommaGlove accessory, Figure 2)
If the read operation success, the result will display in the result list (Right-hand side of Figure 8).
10
