Rotate 180 Deg.
MAKE SURE CATCH PLATE IS
EVEN WITH TOP SURFACE
GOOD
BAD
RED Locking Screw
Handing Instructions for ML01/ML03/ML04/ML05 Mortise Locks
Template for ML01/ML03/ML04/ML05 Mortise Locks
STEP 1
: Move the RED Locking Screw to side of lock-body being
locked.
STEP 2
: Push in latch then depress catch plate with screw driver.
STEP 3
: Pull latch out of lock-body and rotate 180°.
STEP 4
: Push in latch while holding screw driver behind latch
tail. Note: Push in latch until catch plate is no longer
depressed.
STEP 5
: Rotate lock front to match bevel of door.
2.125”
.75”
1.5”
2.25”
2.75”
1-5/16”
diamet
er
cylinder hole f
or e
xter
ior
side only
7/8”
diamet
er
thr
ough hole
3/8”
diamet
er
thr
ough hole
3/8”
diamet
er
thr
ough hole