Commander Connect Owners Manual
19
Getting started – basic call features
Making and answering calls
To make an external call
•
Lift the Handset and select a free Line in one of the following ways:
•
Press the Line Key 1 for Line 1, Line Key 2 for Line 2, and so on. (This is applicable
only if the Programmable Keys are programmed as Line Keys, which is the default
programming)
•
Dial 0, (to select a Line from Outgoing Group 1)
•
Dial 760 - 769, (to select a Line from Outgoing Groups 2 to 11 respectively)
•
Dial the telephone number you require. Digits are sent to line as they are dialled.
Note:
If you do not lift the Handset then you may enter digits in Pre-dial mode, digits will not be
sent for processing until you lift the Handset, press the Hands-free key, or select 'Dial' from the
'Display'. You can edit the number you have entered prior to sending to the line, by using the
left-hand Keypad ‘Edit Key’(
), located below the keypad.
Note:
If you are entering an external number in Pre-dial mode, enter 0, 760 - 769 to have a line
selected when you send the digits for processing.
To make an internal call
You can place an internal call in one of the following ways:
•
Select the ‘Internal Call’ option on the 'Display' and select the desired Station from the
list
•
Dial the Station number (20 – 59 ) and select 'Dial'
•
Lift the Handset and dial the Station number.
The 'Display' will show the Station number, or, if programmed, the Station name.
From a standard telephone, go off-hook and dial the Station number.
To call a Group
You can call any of the 20 Groups in one of the following ways:
•
Select the ‘Internal call’ option on the 'Display' and select the desired group from the
group list which is located under ‘Other’
•
Dial the Group number (180 - 199) and select ‘Dial’
