Commander Connect Owners Manual
57
Day Service / Night Service
The ‘Day Service’ / ‘Night Service’ feature allows you to change the Stations which ring on
incoming calls, change the Class of Service at each Station, and change the voice greeting
heard by callers (if you have Voicemail installed). These changes can take place automatically,
at pre-programmed times daily, or can be invoked manually. Furthermore, the system can be
programmed to remain in ‘Night Service’ over the weekend.
To set the automatic start and end times for Night Service
The Automatic ‘Night Service’ feature allows you to set two time bands in each twenty-four hour
intervals; the system then automatically enters ‘Night Service’.
From the Programming Station, press the PROGRAM Key
Press the Scroll Down Key (
) until ‘System programming’ is displayed
•
Select ‘System programming’
•
Enter the System Programming Password and select ‘System’
•
Press the Scroll Down Key (
) until ‘Night Service’ is displayed
•
Select ‘Night Service’
•
Select ‘Automatic on times'
•
Select 'On Time 1' to set the first time the ‘Night Service’ turns on automatically
•
Enter the time in 24 hour format, e.g.1400 is 2:00pm
•
Press ‘Confirm’
•
Select 'On time 2' to set the second time the ‘Night Service’ turns on automatically
•
Enter the time in 24 hour format, e.g. 1400 is 2:00pm
•
Press ‘Confirm’
•
Select 'Off time 1' to set the first time the ‘Night Service’ turns off automatically
•
Enter the time in 24 hour format, e.g. 1400 is 2:00pm
•
Press ‘Confirm’
•
Select 'Off time 2' to set the first time the ‘Night Service’ turns off automatically
•
Enter the time in 24 hour format, e.g. 1400 is 2:00pm
•
Press ‘Confirm’.
Press the handsfree button to finish programming
To manually turn on Night Service
The Manual ‘Night Service’ feature enables you to turn ‘Night Service’ on or off manually. When
you turn '‘Night Service’' on, the '‘Night Service’' ringing and 'Class of Service' come into
operation.
•
At Station 20, from the Idle Menu, press the Scroll Down Key (
) until ‘Night Service’ is
displayed
•
Select ‘‘Night Service’’.
Note:
When the Night Service is activated ‘(Night)’ appears on the display on all the
keystations. On station 20 only, one of the display key options will be ‘cancel Night Service’.
When this button is pressed, Night Service will be disabled.
From an SLT on station 20 only, the SLT dials 738 to toggle the night service of and on.
