Commander Connect Owners Manual
88
Programming additional system options
Using a Door Station
You can equip your Commander Connect with a Door Station. The Door Station has a button
which, when pressed, rings at programmed Stations, and has a microphone/speaker for
communication. With a Door Station fitted in your reception area, anyone visiting your premises
can call when they arrive and you can speak to them before you let them in.
Your Commander Connect also features a Doorstrike relay output, which can be used to operate
a Doorstrike mechanism, to allow you open the door from your Station. You must purchase the
Doorstrike mechanism yourself and arrange for a qualified electrician to install it.
To set up a Door Station on your System
•
From the Programming Station, press the PROGRAM Key
•
Press the Scroll Down Key (
) until ‘System programming’ is displayed
•
Select ‘System programming’
•
Enter the System Programming Password
•
Select ‘System’
•
Select ‘Door Station'
•
Select ‘Door Station equipped’
Press the Hands-free Key to finish programming.
To set up which Stations the Door Station will ring
You can choose which Stations will ring upon calling from the Door Station, for either Day or
‘Night Service’.
•
From the Programming Station, press the PROGRAM Key
•
Press the Scroll Down Key (
) until ‘System programming’ is displayed
•
Select ‘System programming’
•
Enter the System Programming Password
•
Select ‘Lines’
•
Select ‘Incoming Ringing’
•
Select ‘Door Station’.
•
Select ‘Day’, Night’, or ‘Day and Night’
•
If the Door Station is to ring an individual Station select ‘Station’ and then the required
Station. If the Line is to be presented to a group select Group and then the required
Group.
•
The default is that the Door Station rings Group 1 in both Day and Night Modes.
Press the Hands-free Key to finish programming.
