background image

3

C

le

an

in

g

&

U

se

Please don

t disassemble,

repair or rebuild this product

arbitrarily (please contact the

service center if a repair is

needed. 

·

It may cause an electric

shock or fire. 

Please plug the power cable

firmly into the inner end 

·

It may cause a fire. 

Please hold the plug tightly

when unplugging the power

cable (a part of the copper

wire may be disconnected if

the grabbing is only made on

the cord when pulling out the

cable).

·

It may cause an electric

shock or fire 

When connecting the power

cables after cutting the cable,

please install the product with

power off

·

It may cause an electric

shock or fire  

When installing the product,

please fix it firmly while using

the wall-mounting unit and

screws.

·

It may cause an injury from

the falling object.

Please be careful when using

an AC circuit breaker since

there is a possibility of an

electric shock. 

When cleaning the product,

please rub it with a soft and

dry cloth after plugging out

the power cable. (Please don

t

use any chemical products

such as wax, benzene, alcohol

or cleanser.) 

Please don

t drop the product

on the ground and don

t apply

a shock . 

·

It may cause a failure.

Please use the designated

connection cable within the

maximum calling distance

designated for the product

·

It may reduce the product

performance. 

Please check the use voltage

and current for the DC-only

products and use the

appropriate rectifier. 

·

It may cause a fire. 

Please avoid direct rays of the

sun or heating devices at a

time of installation. 

·

It may cause a fire. 

Please don

t install the

product on an unstable place

or small support board. 

·

It may cause an injury if it

falls down while in use. 

If an abnormal sound, burning

smell or smoke is coming out

of the product, please plug out

the power cable and contact a

service center. 

·

It may cause an electric

shock or fire. 

Please don

t insert any

metallic or burnable materials

into the ventilation hole. 

·

It may cause an electric

shock or fire. 

Please use only the designated

batteries for the products of

using DC power. 

·

It may cause an electric

shock or fire. 

C

le

an

in

g

&

U

se

P

ow

er

&

In

st

al

la

tio

n

Warning

Caution

Summary of Contents for CCU-216AGF












Reviews: