8
①
You can activate each icon to be operating in away mode.
(Devices and sensors should be installed before activating)
- Security1(Burglar1) : Activating security 1 sensor in away mode
- Security2(Burglar2): Activating security 2 sensor in away mode
- All lights off : Activating all lights Off in away mode
- Gas valve closed : Activating gas valve closed in away mode
- Standby power block : Activating standby power block device in away mode
●
Time setting for security sensor in away mode (Value : 0 ~ 90 sec available)
①
Setting delay time(Sec) - You can choose delay time after activating away mode.
(Security sensors get activated after delay time ends. - Default 60 sec
②
Releasing delay time(Sec) - You can choose releasing time of reactivating sensors when you
come back home.
(It generates alarm signal after time set [Default 0 sec]
※
Factory default is 0 sec, so you should set the releasing time from 0 to 90 sec
※
It shows the following screen after pressing
「
Setting
」
icon and
「
Setting away mode
」
in order.
7. Away mode setting
