5
3. Operating
Reception status (Monitor-on duration : 30
±
5sec)
①
When the Call button of the door station is pressed, monitor is to be turned on within 3
seconds along with emitting ringing sound.
②
Controlling the volume level of ringing tone is possible with turning the ringing-tone-
control-dial upwards or downwards.
Conversation status (In case of receiving a call : 60
±
5sec)
①
After proper completion of wiring between a monitor and a door camera, by pressing the
Monitor button in the monitor-on status makes conversation begin.
②
When having a call from a door station, entrance view will be displayed and monitor and
talk LED blinks. Press the Talk button to begin conversation.
③
To adjust volume level of talk-volume, turn the talk-volume-control-dial upwards or
downwards.
④
Monitor must deliver clear voice to the receiver and it should be automatically turned off
after elapsing 60
±
5sec
⑤
To turn on the monitor again, press the Monitor button on the monitor.
⑥
Interphone can come in the conversation by picking up the handset while monitor and
camera are having a conversation.
⑦
When you feel like to hang up the phone or after finishing the conversation, press the Talk
button.
DOOR OPEN
When the OPEN BUTTON is pressed (KEY-shaped icon), door is opened.
(This function works in case a door camera provides door release function.)
※
Function is same on the interphone.
OPERATION OF CAMERA 1, CAMERA 2 FUNCTIONS
①
With the wiring completed, press "Talk" button then "Monitor" button (or "Door" button
then "Talk" button) to watch images from Camera 1 or Camera 2 and to talk. When you
press "Monitor" button once, you will see image from Camera 1,, when press the button
twice you will see Camera 2, and pressing the button three times will return the display back
to stand-by status.
(When the camera is not connected you will not see the display.)
②
On the stand-by mode, when there is a calling from Camera 1 or Camera 2, you will hear the
calling sound and LED of monitoring and talk button will be blinking, and the image from
camera will be shown on the screen, with OSD showing whether the camera is from "DOOR
1" or "DOOR 2".
OPERATION OF INTERPHONE
1. TALK WITH DOOR
①
When there is a calling from the door and when the interphone is connected to the monitor
unit, you will hear the calling sound from interphone as well, like from the monitor.
②
You can talk with the door(visitor) by picking up the handset of interphone, and can open
the door by pressing "Door" button.
③
When the interphone and door camera are talking, you can make the three parties talk by
