6
4
.
GUI Description
3..
(stand-by mode) Operation
- By pressing the Monitor button repeatedly, the monitor will work as following in order.
Camera 1
( Camera 2 )
OFF
Camera 1 ............
(On talking mode)Operation
- By pressing Monitor button repeatedly, the monitor will work as following in order.
Camera1
( Camera 2 )
Camera 1
( Camera 2 ) ............
Monitoring
: function to see the image of visitor in the entrance.
6
7
3) Delete individual RF cards
①
Press program number (4) and press OK button (E)
②
Enter the password and press the OK button (E).
③
When individual deletion mode is successfully entered, the KEY LED will blink.
④
Tag the card to be deleted to the RF receiver.
If you tag another card continuously, you can delete multiple cards at once.
⑤
Press the Cancel button (C) and the KEY LED stops blinking and individual deletion
is completed.
4) Delete all RF cards
①
Press program number (5) and press OK button (E)
②
Enter the password and press the OK button (E).
③
When all deletion mode is successfully entered, the KEY LED will blink.
④
Press and hold the OK button (E) for 2 seconds, the whole deletion will proceed
with the beep sound.
⑤
When the whole deletion is completed, beep sound and KEY LED will stop..
