Commax JNS-4CM, User Manual

4

4. Signal and Lamp Specification. 

5. How to use and function 

If the situation will occur simultaneously, corridor light and master station lamp will blink at once.

(Corridor light, shower room, bed, interphone will blink by turns) 

55--11.. B

Beedd C

Ca

allll ((B

BE

ED

D N

Noo..:: 44 ddiiggiittss))

5-1-1. Call a handset in bed or press the dial button to answer the call.
- Pick up the receiver -> Input a sick room and BED number -> Call(#) -> Talk
- Pick up the receiver -> Shortcut button -> Talk
- Speaker phone -> Input a sick room and BED number -> Call(#) -> Talk
- Speaker phone -> Shortcut button -> Talk
- Shortcut button -> Pick up the receiver -> Talk

5-1-2.  
When you finish the conversation, please hang off the handset. 
5-1-3. 
While in conversation, Green led lamp will turn on and Call xxxx-Bed No will be displayed. 

55--22.. S

Suub

b S

Stta

attiioonn FFuunnccttiioonn 

5-2-1. Communication with master and sub station. 
- Press the call button in sub station to communicate with master station, and then green lamp will 

be lighted and white lamp in corridor will be lighted(in that case, the Led lamp in master station   
alarm is warning). 

- Press the cancel switch to cancel the communication in sub station (LED in master station display 

as Sub cancel REQ).

Section        LCD         LED       SOUND   Corridor Light

Communication

Call: XXXX  Steady Green

Bed Paging       Call: XXXX    Flashing Green Melody Sound Flashing White

Toilet(Room)     Emerg: XXXX  Flashing Red   Emer. Sound   Flashing Red

Toilet(Corridor)   Emerg: XXXX  Flashing Red   Emer. Sound   Steady Red

Presence S/W                  Steady Green                 Steady White

Staff Paging       Staff: XX    Flushing Ginger Police Sound   Steady White

Flashing Red

Interphone      Process AN90:XX

www.safemag.ru

www.safemag.ru