20
6.1.1.
Away
Away Mode
The status display of going out setting
When you go out, you can set up these functions security sensor, visitor recording,
light off, close gas valve, indirect call etc.
Away mode setting
1)
Press the icon, away mode will be started.
2)
The away mode will be executed automatically after the specified away
delay time
.
3)
If you want to cancel
away
mode, press ‘CANCEL’ button.
[Go Out mode set-up]
1.Delayed time for go-out
3.Start away mode
2.Action item when going out
※ If security mode is on, away mode cannot be started.
※ Return home sensor delay setting is set by setting -> user option -> delayed
from adjusted go out time.
Set Go Out mode
1)
Set items to be executed when go out mode
2)
Press the ‘Option’ button on the setting screen of go out mode, the
setting screen of go out mode is displayed.
3)
Check the use security sensor and execution item to use.
②
③
①
Summary of Contents for Wall PAD CIP-700MW
