5
Installation – Attaching the Display
1.
To mount the display onto the
CBMOWCOW-MT, attach hook arms to the
mountingpoints at the back of the display. The
lockof the hook arms should be at the
lowerside of the display screen.
NOTE: Make sure the hook arms are aligned
horizontally, or the picture will become skewed.
2.
Hook the hook arms on the back of the display onto the frame of the
CBMOWCOW-MT (as shown). Adjust the screen horizontally alongthe
crossbar until it is in the desired position. When the display is inthe
desired position, push the locks upwards so the pin of the lockengages a
slot on the underside of the crossbar.
CAUTION: Due to the weight of the display screen and the height of
the mounting crossbars, the lifting of the display should be done
by a minimum of two people.
3.
To unlock/release the screen, turn the key to release the spring
loaded pin in the lock.
