LV-67O User’s Manual
-
16
-
30
ATX3-
29
BCLK-
32
ATX3+
31
BCLK+
34
GND
33
GND
36
DDCPCLK
35
SMBCKL
38
DDCPDATA
37
SMBDATA
40
N/C
39
SPDIFO
To setup the LCD, you need the component below:
1.
A panel with LVDS interfaces.
2.
An inverter for panel’s backlight power.
3.
A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable,
because every panel has its own pin assignment, so we do not provide a standard
cable; please find a local cable manufacture to make cables.
LCD Installation Guide:
1.
Preparing the
LV-67O
,
LCD panel
and the
backlight inverter
.
2.
Please check the datasheet of the panel to see the voltage of the panel, and set
the jumper
JVLCD
to +12V or +5V or +3.3V.
3.
You would need a LVDS type cable.
4.
To connect all of the devices well.
For sample illustrator only
Panel side
Board side
