MPX-3132 User’s Manual
6
1.4 <SATA RAID Configuration>
The board integrates Silicon Image 3132 with RAID function for Serial ATA II drives, and
supports the configurations below:
RAID 0 (Stripping)
: Two hard drives operating as one drive for optimized data R/W
performance. It needs two unused drives to build this operation.
RAID 1 (Mirroring)
: Copies the data from first drive to second drive for data security, and if
one drive fails, the system would access the applications to the workable drive. It needs two
unused drives or one used and one unused drive to build this operation. The second drive
must be the same or lager size than first one.
For more information of Silicon Image Technology, please visit silicon Image website.
If you need to install an operation system on the RAID set, please use the driver disk
attached in the package when it informs you to obtain the RAID drivers.
Please press
<CTRL+S>
to enter the RAID configuration menu.
You can setup the RAID under operation system for Microsoft
®
Windows XP SP2(or later)
or Windows 2000 SP4(or later) version.
