Page 11
SET UP & USE
LIGHTING AND ADJUST THE FIRE INSTRUCTION
WARNING:
Read instructions before lighting.
If ignition does not occur in 5 seconds, turn the burner control off, wait 5 minutes, and
repeat the lighting procedure.
1.
Before use please make sure the control knob is in “OFF” position. To ignite, push
the control knob and slowly turn the knob counterclockwise to “HI” position for
5 seconds until you hear a click and the burner ignites (A). The knob needs to be
depressed for 10 seconds during lighting process.
2. You can adjust the fire from HI to LOW by slowly turn the control knob clockwise
(B).
3. Please turn the control knob to “HI” position, then push the knob and clockwise
to “OFF” position to turn off your pizza oven (C).
ON
OFF
B
ON
OFF
A
ON
OFF
C
OPERATING INSTRUCTIONS
USING THE OVEN
The burner is rated at 14,500BTU/Hr. To begin:
1.
Make sure the oven has been leak tested and properly placed.
2. Remove any remaining packing material.
3. Light the burner using the LIGHTING INSTRUCTIONS below.
4. Preheat for about 20 minutes
NOTE:
Pizza will cook in 2 minutes or less when oven temperature greater than 900˚F.
