background image

 

7 HOMEDEPOT.COM

 

 

Please contact 1-877-527-0313 for further assistance.

Troubleshooting

WarninG:

 Before doing any work on the fixture, disconnect power to the light fixture.

Minor problems often can be fixed without the help of an electrician.

Problem

Possible Cause

Solution

The fixture will not light.

The power is off.

Ensure the power supply is on.

The circuit breaker is off.

Ensure the circuit breaker is in the on position.

There is a bad connection.

Check to ensure proper wire connections are made. 
Contact a qualified electrician.

There is a defective switch. Contact a qualified electrician.

The fuse blows or the 
circuit breaker trips when 
the light is turned on.

The wires are crossed 
or the power wire is 
grounding out.

Check the wire connections.

Contact a qualified electrician or call Commercial 
Electric customer service 1-877-527-0313.

Care and Cleaning

CaUTiOn:

 Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from 

the fuse box.

 

Clean the fixture with a soft, dry cloth.

 

Do not use cleaners with chemicals, solvents, or harsh abrasives.

 

Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture.

Summary of Contents for 1001820735

















Reviews: