A
Test leads
Measurement range switch
B
C
D
E
Resistance-zero adjustment
Analogue display
Input negative socket
Part
Description
Input positive socket
F
G
H
Mechanical zero adjustment
1.5V IEC LR6 AA battery
(included in multimeter)
2
1
1
1
1
Quantity
1
1
1
PACKAGE CONTENTS
OPERATOR SAFETY
Safety Information(Continued)
4
HOMEDEPOT
.
COM
Please contact 1-877-527-0313 for further assistance.
3
Pre-Operation
The instrument has left our factory in safe and perfect condition. In order to maintain
this condition, the user must pay attention to the safety references contained in
this manual.
WARNING: This manual contains
information and warnings necessary
for safe operation and maintenance
of the instrument. It is recommended
that you read and understand this
instruction manual thoroughly prior
to using the instrument. Failure to
understand these instructions and to
comply with the warnings and
instructions contained herein can
result in serious injury or damage.
WARNING: In order to avoid electrical
shock, remove the test leads before
you open the battery cover.
WARNING: In order to avoid electrical
shock, proper safety measures must
be respected when working with
voltages exceeding 120V (60V) DC or
50V (25V) RMS AC. These voltages
represent the threshold contact
voltages in accordance with DIN YDE
(German Standard).
CAUTION: Only use the instrument in
circuits fused with a maximum
of 16A.
Warranty
WARRANTY: 12 months
For one year from the date of purchase, this product is warranted against any
defects in material or workmanship. This warranty is void if this product is ever
used while providing commercial services or if rented to another person.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HOMEDEPOT.com.
CAUTION: Prior to taking any
measurement, ensure that the
test leads and test instrument are
in perfect condition. These
measuring instruments may only
be used within the specified
ranges. The instrument may only
be opened for fuse or battery
replacement by authorized
persons. Prior to opening the
instrument, ensure that the meter
is switched off and disconnected
from any circuits. Never measure
a current in circuits with AC/DC
voltage present.
NOTE: In order to ensure correct
functioning and a long life span,
avoid leaving this product in
direct sunlight as this causes
overheating.
