4
Assembly
1
Attaching the lamp head to the bases
□
Lay the lamp head (A) face down with the bottom turned
upwards, and position the two square feet (B) between the
slots on the bottom of the lamp head (A).
□
Attach the lamp head (A) to the square feet (B) by inserting the
screws (AA) into the bottom of the square feet (B) and through
the bottom of the lamp head (A).
AA
A
B
Operation
1
Adjusting the light direction
□
To adjust the direction of the light, simply turn the top portion
of the lamp head (A) up or down.
2
Turning the lamp head on
NOTE:
Plug the worklight into a 120V outlet before you turn
it on.
□
Press the On/Off switch (1) on the lamp (A) to turn the lamp
on and off.
A
1
