7
User manual Audiostreamer (NO_EN_F_D_NL_ES_SE_DK_SU) 1m
NO
EN
F
D
NL
ES
SE
DK
SU
EN
How to set the the Maestro to pairing mode!
2.
Press and hold the pairing button on the Maestro (see the Maestro’s
•
user manual for instructions) until you see the Battery indicator
lamp on the Maestro flash alternately red and blue. You will also
hear a double tone from the Maestro. The Maestro will search for
the Audiostreamer.
Pairing completed!
3.
When the Maestro and Audiostreamer are ready, they will establish
•
communication with each other. The communication lamp
4
will
illuminate solid blue.
If the pairing was unsuccessful, repeat steps 1 to 3.
•
If you pair the Audiostreamer with Bluetooth devices other than the
Maestro, the device must be set to pairing mode (the device must have a
password of 0000 for the pairing to be completed).
We cannot guarantee lip synchronisation with devices other than the
Maestro as the Audiostreamer uses the communication delay of the
device it is paired with.
Connect/disconnect the audio transfer
with the Maestro
E
•
stablish connection with the Maestro
Make sure there is power to the Audiostreamer.
-
Switch on the Maestro and set it the programme: TV/Radio
-
(see the Maestro’s user manual for instructions)
-
The Maestro will search for your previously paired
-
Audiostreamer
After a few seconds the Maestro will establish contact with the
-
Audiostreamer. This is indicated by the communication lamp
4
Illiminating solid blue. It will light like this as long as there is an
audio connection with the Maestro.
If the Maestro does not establish contact with the
-
Audiostreamer, you can establish contact by quickly pressing
the pairing button
6
on the Audiostreamer.
Disconnect the connection with the Maestro
•
Change programme on the Maestro or switch it off
-
(see the Maestro’s user manual for instructions)
Summary of Contents for Audiostreamer
Page 1: ...AUDIOSTREAMER User manual...
Page 2: ...1 1 2 3 4 5 6 9 10 8 11 12 13 7...
Page 3: ...2 AUDIOSTREAMER...
