17
• Adjusting the sound level
The sound level is phone dependent. Please see the user’s manual of
your telephone.
Use as a Voice Amplifier (Dialogue Mode)
The Dialogue Mode function turns off and on by pressing button on
base (4) briefly.You will hear a short acknowledgement signal and the
control lamp (1) will also flash. If the telephone rings while the neckloop
is in Dialogue Mode, the unit will automatically switch to Telephone
Mode.
When in normal use, the internal microphone will be in use, but you
can also connect an external microphone to increase the sound.The
internal microphone will then be switched off.
Use as an audio equipment amplifier;
Please see accessories for
more information.
This manual may differ because of the telephone model
Shirt/blouse Clip
The enclosed clip is pressed in place at the back of the unit. Can be
attached in both directions. COMMidt recommends using the clip in
order to decrease noise when you are moving.
