11
User manual CIBS Office 1g
NO
EN
NO
EN
12
User manual CIBS Office 1g
NO
EN
NO
EN
Lift the handset from your telephone.
-
You will then hear the call through the telephone handset.
-
Through neck loop (Blues II)
•
Make sure that Tango VII is lit on the volume indicator for
-
Blues II
16
c
. If not, press the the selector for Blues II
13
.
Press the answer button
-
1
.
Lift the handset from your telephone.
-
You will then hear the call in Blues II.
-
Note! By using a handset lifter (optional), you will hear the ring
-
signal directly in the neck loop, and you can easily answer the
call by pressing the answer button
1
. Then you do not need to
lift the handset.
end a telephone call (Tango VII)
…
Through the telephone handset
•
Replace the handset of your telephone.
-
Through neck loop (Blues II)
•
Replace the handset of your telephone.
-
Press the answer button
-
1
.
Note! By using a handset lifter (optional), you will be able to
-
close the call by pressing the answer button
1
. Then you do not
need to replace the handset.
make a call from your desk phone (Tango VII)
…
Through the telephone handset
•
Make sure that Tango VII is lit for the volume indicator for the
-
telephone handset
14
c
. If not, press the selector for telephone
handset
11
.
Lift the handset of your telephone, and dial the desired
-
telephone number.
You will then hear the call through the telephone handset.
-
Through neck loop (Blues II)
•
Make sure that Tango VII is lit on the volume indicator for
-
Blues II
16
c
. If not, press the the selector for Blues II
13
.
Press the answer button
-
1
.
Lift the handset of your telephone, and dial the desired
-
telephone number.
You will then hear the call in Blues II.
-
Note! By using a handset lifter (optional), the handset lifter will
-
automatically lift the handset when you press the
answer button
1
. Then you do not need to lift the handset.
How to...
adjust the volume (Blues II)
…
The volume can be adjusted gradually (press once for each volume
•
level) or by pressing the volume button
8
in the desired direction
until the desired volume has been reached.
You will hear a signal when the volume has reached the highest or
•
lowest level.
The Blues II remembers its last volume position, so that when
•
switched off and on it will start at the same volume position.
adjust the volume (Tango VII)
…
For the telephone handset
•
Make sure that Tango VII is lit on the volume indicator for the
-
telephone handset
14
c
. If not, press the selector for telephone
handset
11
Adjust the volume by pressing the volume control for the
-
telephone handset
14
a/b
You will see the sound level in the volume indicator for the
-
telephone handset
14
c
.
For the neck loop (Blues II)
•
Make sure that Tango VII is lit on the volume indicator for
-
Blues II
16
c
. If not, press the selector for Blues II
13
Adjust the volume by pressing the volume control for
-
Blues II
16
a/b
You will see the sound level in the volume indicator for
-
Blues II
16
c
.
adjust the tone level (Tango VII)
…
For the telephone handset
•
Make sure that Tango VII is lit for the volume indicator for the
-
telephone handset
14
c
. If not, press the selector for telephone
handset
11
Adjust the tone level by pressing the tone adjustment
-
for the telephone handset
15
For the neck loop (Blues II)
•
Make sure that Tango VII is lit on the volume indicator for
-
Blues II
16
c
. If not, press the selector for Blues II
13
Adjust the tone level by pressing the tone adjustment
-
for Blues II
17
answer a telephone call (Tango VII)
…
Through the telephone handset
•
Make sure that Tango VII is lit for the volume indicator for the
-
telephone handset
14
c
. If not, press the selector for telephone
handset
11
