6
User manual CIBS Personal Listener (NO_GB_F_D_NL_ES_SE_DK_SU) 1f
NO
EN
F
D
NL
ES
SE
DK
SU
EN
CIBS Neck Loop (receiver)
See the illustrations on page 1 for an explanation of the points below
Volume button
•
1
:
Push upwards for higher volume and downward for lower volume.
On/Off button
•
2
:
Switches device on and off.
Inlet for charging and accessories
•
3
:
The cable from the power outlet (accessory) is connected here.
USB socket
•
4
:
Used for charging the device via USB cable to a computer
(accessory).
Pairing button
•
5
:
Sets the CIBS Neck Loop to pairing mode.
Headset socket
•
6
:
Can be connected to the accompanying headset or a standard
headset.
Battery indicator lamp
•
7
:
Shows the battery level of the CIBS Neck Loop.
See the table on page 11 for an explanation of the light signals.
Twin Charger Cradle.
See the illustrations on page 1 for an explanation of the points below
Charge cradle
•
8
:
For charging CIBS Neck Loop and Liberto.
Power socket
•
9
:
The accompanying power supply is connected here.
Liberto
See the illustrations on page 2 for an explanation of the points below
Talk button
•
10
:
Used to establish connection with the CIBS Neck Loop.
Inlet for charging and accessories
•
11
:
The power supply cable (accessory) is connected here, as well as
other accessories with 2.5mm jacks.
Status lamp
•
12
:
Shows if the Liberto is communicating with the CIBS Neck Loop.
See the table on page 11 for an explanation of the light signals.
