10
User manual CIBS Personal Listener (NO_GB_F_D_NL_ES_SE_DK_SU) 1f
NO
EN
F
D
NL
ES
SE
DK
SU
EN
How to...
adjust the volume (CIBS Neck Loop)
…
The volume can be adjusted in stages (press for each volume level)
•
or by pressing the volume button
1
on the CIBS Neck Loop in the
desired direction until the desired volume level has been reached.
You will hear a signal when the volume has reached the lowest or
•
highest level.
The CIBS Neck Loop remembers its last volume position, so that
•
when switched off and on it will start at the same volume position.
adjust the sensitivity/strength of the microphone
…
The sensitivity/strength can be adjusted in stages (press for each
•
level) or by holding the volume button
18
on the Liberto in the
desired direction until the desired level has been achieved.
The Liberto remembers its last volume position, so that when it is
•
switched off and on, it will start at the same volume position.
switch between microphones
…
You can switch between two different microphones.
•
The omni-directional microphone captures sound from all direc-
tions. The directional microphone captures sound from just one
direction and reduces background noise.
When using the directional microphone
•
, it must be pointed
towards the sound source you wish to hear
(see page 2 to see where the microphones is placed)
Switch between the microphones by setting the microphone source
•
13
button to the desired position.
establish speech connection
…
Establish connection from the CIBS Neck Loop
•
Switch on the Liberto (see page 8 for instructions)
-
Switch on the CIBS Neck Loop.
-
The CIBS Neck Loop will then search for the Liberto.
-
The CIBS Neck Loop will establish a connection with the Liberto.
-
You will see this when the status lamp
12
on the Liberto
illuminates solid yellow.
Establish connection from the Liberto
•
Switch on the Liberto (see page 8 for instructions)
-
Switch on the CIBS Neck Loop.
-
Press the talk button
-
10
.
The Liberto will search for your CIBS Neck Loop
-
The Liberto will establish a connection with the CIBS Neck Loop.
-
You will see this when the status lamp
12
on Liberto illuminates
solid yellow.
