12
User manual CIBS Total (NO_GB_F_DE_NL_ES_SE_DK_SU) 1i
NO
EN
F
D
NL
ES
SE
DK
SU
EN
Turn On/Off Maestro and Liberto
How to turn on Maestro/Liberto:
Press and hold in the On/Off button
•
9
on Maestro /
33
on Liberto
until you see a blue light on the Battery indicator lamp
7
on
Maestro
30
on Liberto, at the same time as you hear an audio signal
via the T-Loop or via a headset connected to Maestro.
How to turn off Maestro/Liberto:
Press and hold in the On/Off button
•
9
on Maestro /
33
on Liberto
until you see a red light on the Battery indicator lamp
7
on Maestro
30
on Liberto, at the same time as you hear an audio signal via the
T-Loop or via a headset connected to Maestro.
Pairing units
Units must be programmed to be able to communicate with each other
and with other Bluetooth units (e.g. a mobile phone). This is done by
connecting these together wirelessly (pairing).
NOTE! It is important that Maestro, Audiostreamer, Liberto and other
Bluetooth units are within a distance of less than 1 meter during pairing
and that the units to be paired are fully charged.
All units in CIBS Total (Maestro, Liberto and Audiostreamer) have been
ready-paired. If an error should occur so that pairing disappears you can
use the instructions at point 2.
Pair Maestro with a mobile telephone
1.
This is how you put Maestro in pairing mode:
1.1
Turn on Maestro
•
Press and hold in the pairing button
•
11
until you see the battery
indicator lamp
7
blink alternating red and blue and you hear
a double tone. Maestro is now ready for pairing for approx. 3
minutes.
This is how you set your mobile phone to discover Maestro:
1.2
Follow the mobile phone’s user manual. Normally this involves
•
finding the setup, connection or Bluetooth menu on the mobile
telephone and choosing “discover” or “add” a Bluetooth unit.
View an example of a typical mobile telephone on the next page.
