7
User manual Maestro (NO_EN_F_D_NL_ES_SE_DK_SU) 1t
NO
EN
F
D
NL
ES
SE
DK
SU
EN
During charging, the Battery indicator lamp
7
will flash red.
When the Maestro is fully charged the Battery indicator lamp
7
will shine a solid blue.
When the battery is low the Battery indicator lamp
7
will blink red and
you will hear an sound signal from the Maestro.
NOTE: The lifetime of the battery will be significantly reduced if the
device is left uncharged for long periods. We advise you to charge the
device at least once a month. When the operation time of the battery
begins to decrease and you wish to replace it, please send it to your local
dealer. The article number of the battery is: 956-001
Switching Maestro on and off
How to switch on the Maestro:
Keep the ON/Off button
•
9
pressed until you see the Battery
indicator lamp
7
turn blue. At the same time you should hear a
signal via the T-Loop or via the headset connected to the Maestro.
Note:
•
The first time you switch on your Maestro, it will
automatically turn into pair mode. The Battery indicator light
6
then flashes alternately red and blue.
Go to chapter Pairing the Maestro with other devices and
skip step 1 to finish the pairing.
How to switch off the Maestro:
Keep the ON/Off button
•
9
pressed until you see the Battery
indicator lamp
7
turn blue. At the same time you should hear a
signal via the T-Loop or via the headset connected to the Maestro.
Pairing the Maestro with other devices
The devices must be programmed to communicate with each other
and other Bluetooth devices, e.g. a mobile phone. This is done by
connecting them wirelessly (pairing).
NOTE: It is important that the Maestro and the Bluetooth devices is
paired with are within one meter of one another during pairing and that
the units to be paired are fully charged.
1.
How to set the the Maestro to pairing mode:
Switch on the Maestro
•
Press and hold the pairing button
•
11
until you see the Battery
indicator lamp
7
flash alternately red and blue. You should
also hear a double tone. The Maestro is now ready to pair for
approximately 3 minutes.