8
User manual Maestro (NO_EN_F_D_NL_ES_SE_DK_SU) 1t
NO
EN
F
D
NL
ES
SE
DK
SU
EN
2.
How to configure the mobile phone so that it detects
the Maestro:
Follow the mobile phone’s user manual. Usually this involves
•
finding the setup, connection or the Bluetooth menu on the
mobile phone and choosing DISCOVER or ADD a Bluetooth
device. See an example of a typical mobile phone below.
Fig. 6
0000
Connectivity
Push to talk
Infrared
Bluetooth
Modem
Synchronization
Data cable
Select
Back
Fig. 6
0000
Devices found
Maestro
Select
Cancel
Fig. 6
0000
Fig. 6
Maestro
Passcode:
****
Ok
Fig. 6
0000
0000
Fig. 6
Fig. 6
Devices found
Maestro
Ok
Fig. 6
0000
Maestro
Paired.
The handsfree
is now ready
for use
Fig. 6
0000
Cancel
3.
The mobile phone finds Maestro!
The mobile phone asks if you wish to connect to it. Accept by
•
pressing Yes or OK on the mobile phone and confirm with the
pin code, which is 0000 (4 zeros).
The mobile phone will confirm if the pairing has been
•
successful.
If the pairing is unsuccessful, repeat this procedure.
•
If you wish to pair the the Maestro with a Bluetooth product without a
display, the product must be set to pairing mode and use password 0000
so that the pairing can be performed.
The Maestro can be paired to a maximum of 8 devices. If you try
to pair a ninth device, the device that is the longest un-used will be
removed from the Maestro. Use the list on page A to keep an overview of
what is paired with the Maestro.
How to...
adjust the volume
…
The volume can be gradually increased (press once for each
•
volume level) or by pressing the volume button
10
in the desired
direction until the desired volume level has been reached.
You will hear a signal when the volume has reached the lowest or
•
highest level.
The Maestro remembers its last volume position, so that when
•
switched off and on it will start at the same volume position.
