12
User manual Maestro (NO_EN_F_D_NL_ES_SE_DK_SU) 1t
NO
EN
F
D
NL
ES
SE
DK
SU
EN
Battery indicator lamp
7
What you see
What this implies for the Maestro
Solid blue light
The battery level is between 100% - 20%
Flashing red light
The battery level is below 20%
Solid blue light
(while charging)
Charging complete
Flashing red light
(while charging)
The Maestro is charging
Alternate blue and
red light
The Maestro is ready for pairing
Factory default settings
This function deletes all pairings on the Maestro.
•
Any settings made after you received the device will also be deleted.
•
Press and hold the pairing button. First you will hear a double tone
•
which indicates the device is set to pairing mode. You must keep the
button pressed until you hear the second double tone.
Switch off the Maestro. When you switch the device on again, it will
•
automatically go into pairing mode (the battery indicator lamp will
flash alternately red and blue). This indicates that the device has
been reset to the factory default settings.
Trouble shooting and FAQ
The Maestro will not switch on!
Charge the battery
•
The Maestro will not charge!
Make sure the power supply is correctly connected to the
•
Maestro and that the plug is working.
I hear crackling!
For best sound quality, the Maestro must be within range of the
•
mobile phone, Liberto/Allegro or Audiostreamer.
If you are using the earbuds, make sure the plug to the earbuds is
•
correctly connected.