4 Advanced System Operation
CommPact Installation Manual
24
4.2. Cancel
Report
This feature allows the user to cancel false alarms. Cancel Report behavior depends on time when it
is performed. If the user selects Cancel Report:
•
…before the alarm/restore message is sent, all the pending alarm or restore messages
in the queue are aborted and marked "Cancelled" in the event log.
•
…within 5 minutes since an alarm, a Cancel Report event and the user number are
sent to the Central Station;
•
…at the moment when the event is being reported (communication in progress), the
event reporting is not cancelled;
Non-alarm events (system trouble, set/unset etc.) are not aborted by Cancel Report.
To activate cancel report:
•
From the main menu, select Cancel Report. [1].
4.3. Zone
Omitting
When a detector is omitted, it is ignored by the system and does not generate an alarm when
triggered.
To omit a detector:
1.
From the Omit Zones menu, select Omit [21].
2.
Using the arrow keys, scroll to the detector you want to omit
3.
Press '
√ʹ to change the
omit status.
4.
Press ‘Χ’;
Save Changes?
is displayed.
5.
Press '
√ʹ to confirm the changed
omit status.
To un-omit all detectors:
1.
From the Omit Zones menu, select Un-omit All [22].
2.
Press '
√ʹ; all detectors are
un-omitted.
All omitted zones are automatically un-omitted when the system is unset.
A Fire zone cannot be omitted.
4.4. User
Codes
The Control System supports up to 32 individual user codes. Each of these codes is four digits long.
Most system operations require you to enter a valid user code. The ability to perform an operation
is defined by your user code’s authorization level. These authorization levels are pre-defined for
each code as explained below.
Codes 1-29 can be edited only by the Master code.
The Engineer code and the Central Station TWA Code can be edited only by the engineer.
Summary of Contents for Control system
