Page 1 of 8
© 2019 CommScope, Inc. All Rights Reserved
Contents
Installation Instructions
660003872
Rev. A
TC-1434-SIP-US
Rev A, Oct 2019
www.commscope.com
BUDI-M-FPS
1.
General product information
The BUDI-M-FPS is a family of plastic indoor/outdoor UL listed wall mounted fiber splitter terminals for use in MDU & FTTB
applications. The terminals are equipped with either a 1x64 splitter or a 1x32 splitter. In addition to providing 64 or 32 output
fibers via the splitters, the terminal is also equipped with 24 additional connectors with pigtails or a pre-terminated indoor-
outdoor cable to provide non-split or pass thru fiber services. The 24 fibers are terminated to fiber ports 67 - 90.
4 BUDI-M-FPS
configurations are available:
•
1x64 Splice Only (Customer will need to splice in a feeder cable)
•
1x64 Pre-Term (Equipped with 24f indoor/outdoor cable)
•
1x32 Splice Only (Customer will need to splice in a feeder cable)
•
1x32 Pre-Term (Equipped with 24f indoor/outdoor cable)
2.
Warnings and caution
IMPORTANT INSTRUCTIONS
• Read and understand all instructions
• Follow all warnings and instructions marked on the product
SAVE THESE INSTRUCTIONS!
Risk of Injury! Hazardous Light when fiber is exposed. Wear appropriate protective eyewear when installing or servicing fiber.
3.
Product images
General product information ................................................ 1
Warnings and caution ............................................................ 1
Product images ....................................................................... 1
Kit Contents............................................................................. 2
Optional Accessories ............................................................. 2
Open the Box .......................................................................... 2
Mount the Box ........................................................................ 2
Splice only application ........................................................... 2
................................................................2
Dielectric Feeder Cable Preparation
......................................................3
Armored Feeder Cable Preparation
......................................................4
............................................... 4
Drop Cable Installation .......................................................... 6
Close and Seal the Box ........................................................... 7
11. Trade-marks ............................................................................ 8
12.
Contact information ............................................................... 8
1x64 Splice Only
1x32 Splice Only
1x64 Pre-Term
1x32 Pre-Term
