M0149AYA_InstInstr_CMAX-OMFx-43M-i53
Technical Support:
http://www.commscope.com/wisupport
Note
1) Cable min. bending radius: 40mm
2) For massive/hard ceilings, please
use Hard Ceiling Mounting Kit
7705125 which serves to guide the
jumper to the side. For this kit, a
separate instruction (M0149AWx) is
available:
© Copyright 2020 CommScope, Inc.
All rights reserved.
All information contained in this manual has been revised thoroughly. Yet CommScope accepts no liability for any omissions or
faults.
CommScope reserves the right to change all hardware and software characteristics without notice.
Names of products mentioned herein are used for identification purposes only and may be trademarks and / or registered
trademarks of their respective companies.
No parts of this publication may be reproduced, stored in a retrieval system, transmitted in any form or by any means,
electronical, mechanical photocopying, recording or otherwise, without prior written permission of the publisher.
CommScope, 04-May-2020
