TECP-91-008 • Rev C • January 2019
Page 6
© 2019
CommScope
. All Rights Reserved.
Figure 5. EHD 4RU Panel, Rear View
Figure 6. EHD 4RU Panel, Rear View, Rear Cover Removed
1.4
Specifications
Table 1
lists specifications for the EHD Panel.
Note:
The 4RU panel comes with a rear midshelf, shown in
Figure 6
. This
midshelf can be removed for easier access to the bottom blades when cabling or
for high count cables that will be terminated on both lower and upper blades. The
midshelf should be used when many trunks are terminated in the panel. The
midshelf prevents the weight of the trunks terminated on the top blades from
weighing down on the trunks terminated at the bottom of the panel thus impeding
their movement.
26426-A
MIDSHELF
TO REMOVE THE MIDSHELF,
REMOVE THESE TWO SCREWS
