Era
™
Medium Power Carrier Access Point Installation Guide
M0201AJB
Page 26
© October 2018 CommScope, Inc.
Installing CAP Ms
6
Secure the Mounting Bracket to the wall
(or other suitable vertical surface)
shown to the right.
a
Install the mounting bracket using 4
M6 screw anchors (not included) or
suitable lag bolts according to the
drilling layout.
b
Confirm that the Mounting Bracket
is securely fastened to the wall.
The M6 screw anchors do not ship
with the CAP M as the anchor type is
dependent on the on-site conditions
(wall structure and materials). Use
screw anchors that are rated for the
mounting surface.
Single Mounng Bracket
1
2
3
4
1
through
4
are the four screw anchors