Era
™
Medium Power Carrier Access Point Installation Guide
M0201AJB
Page 50
© October 2018 CommScope, Inc.
Installing CAP Ms
CAP M AC Power Cable
The AC power cable is a 3.2 m (10.5 ft) 16 AWG cable with a 4-pin Amphenol C016 series plug on one end to
connect to the CAP M Mains connector. The other end of the cable is unterminated with 3 end splices to
connect to the AC power source. A 10 m (33.7 ft) AC power cable is also available as an option. The AC power
cable is shown in
.
Figure 9.
CAP M
AC Power Cable
CAP M DC Power Cable
The standard CAP M DC power cable is a 3.2 m (10.5 ft) 13 AWG cable with a 4-pin Amphenol C016 series plug
on one end to connect to the CAP M Mains connector. The other end of the cable is unterminated with 2 end
splices to connect to the -48 Vdc power source. The standard DC power cable is shown in
.
Figure 10.
CAP M DC Power Cable
Protecve
cap
1
2
3
4
CAP M
Mains
connector
Black
White
Green
Amphenol
4-Pin female
connector
3x
end splice
Protecve
cap
1
2
3
4
CAP M
Mains
connector
Black
Red
Amphenol
4-Pin female
connector
2x
end splice