© 2019 CommScope, Inc. All rights reserved.
Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.
All trademarks identified by ® or
™ are registered trademarks or trademarks, respectively, of CommScope, Inc. A997-0086 G (5/19)
Page 2 of 8
A997-0086
Installation Instructions
Ensure a torque spanner is used when tightening fasteners, see the mounting kit
diagrams on the following pages for the correct torque recommendations.
Ensure antenna is installed with the connectors at the bottom.
DO NOT PLACE
POINT LOADS ON
ANTENNA RADOME
DO NOT USE ROPE
OR CHAIN OR
SLING
ATTACHMENT
AROUND ANTENNA
FOR LIFTING
USE MOUNTING
BRACKETS FOR
LIFTING AS
SHOWN
