Page 11 of 11
© 2018 CommScope, Inc. All Rights Reserved
9.10.
Close the bend control cover (retaining feature
down).
9.11.
Route the patch cords through the trumpet.
9.12. Before closing the drawer, pay attention to the patch
cord routing.
10. Trademarks
All trademarks identified by ® or ™ are registered
trademarks or trademarks, respectively, of CommScope,
Inc. This document is for planning purposes only and is
not intended to modify or supplement any specifications
or warranties relating to CommScope products or services.
CommScope is committed to the highest standards of
business integrity and environmental sustainability, with a
number of CommScope’s facilities across the globe certified
in accordance with international standards, including ISO
9001, TL 9000, and ISO 14001.
Further information regarding CommScope’s commitment
can be found at
www.commscope.com/About-Us/Corporate-Responsibility-
and-Sustainability.
11. Contact information
Visit our website or contact your local CommScope
representative for more information.
For technical assistance, customer service, or to report any
missing/damaged parts, visit us at:
http://www.commscope.com/SupportCenter
This product may be covered by one or more U.S. patents or
their foreign equivalents.
For patents, see www.cs-pat.com
