Page 2 of 11
© 2018 CommScope, Inc. All Rights Reserved
3.
Product image
Note: FACT chassis with LC-Adapters shown as example.
4.
Kit content
• FACT element NG4
• Brackets
• Color coding labels
• Transparent pockets with labels
5.
Mounting FACT chassis in rack
5.1.
Mounting FACT chassis
5.1.1.
Prepare the rack with the brackets on the position
where you want to install the FACT chassis (by sliding them
in ).
5.1.2.
Take the FACT chassis with both hands and align
with the brackets on both sides.
5.1.3.
Slide the FACT chassis into the fingers until you
hear a “clicking noise”.
5.2.
Dismounting FACT chassis
5.2.1.
Open upper drawer (releasable).
Note: empty drawer is shown. This one is marked at the front
(blue marking at the bend control).
5.2.2.
Pull the blue puller locks (make sure both sides
-left & right- are in the unlocked position).
