background image

Page 12 of 12

© 2019 CommScope, Inc. All Rights Reserved

© 2019 Commscope, 
Inc. All Rights Reserved

7. Trade-marks:

All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope,  
Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications 

or warranties relating to CommScope products or services. CommScope is committed to the highest standards 
of business integrity and environmental sustainability, with a number of CommScope’s facilities across the globe 

certified in accordance with international standards, including ISO9001, TL 9000, and ISO 14001. Further informa

-

tion regarding CommScope’s commitment can be found at: 

 

 

 

 

 

 

www.commscope.com/About-Us/Corporate-Responsibilityand-Sustainability.

8. Contact Information:

Visit our website or contact your local CommScope representative for more information.   

 

 

For technical assistance, customer service, or to report any missing/damaged parts, visit us at: 

 

 

http://www.commscope.com/SupportCenter 

        

This product is covered by one or more U.S. patents or their foreign equivalents. For patents, see   

 

www.commscope.com/ProductPatent/ProductPatent.aspx

Summary of Contents for FACT













Reviews: