Contents
Installation Instructions
FACT FRAME INTER CONNECT DOOR KIT
TC-40156-IP-EN
Rev B, May 2019
www.commscope.com
Page 2 of 12
© 2019 CommScope, Inc. All Rights Reserved
860648992
Rev. B
1.
General product information
The FACT inter connect door kit includes the two doors required for one inter connect frame.
The doors are easy to install and to remove from the frame for optimal access to the FACT chassis.
2.
Warnings and caution
• Fiber optic cables may be damaged if bent or curved to a radius that is less than the recommended minimum
bend radius. Always observe the recommended bend radius limit when installing fiber optic cables and patch
cords.
• Exposure to laser radiation can seriously damage the retina of the eye. Do not look into the ends of any optical
fiber. Do not assume the laser power is turned off or that the fiber is disconnected at the other end.
1.
General product information ................................................ 2
2.
Warnings and caution ............................................................ 2
3.
Kit content ............................................................................... 3
4.
Mounting Door Supports ...................................................... 4
5.
Mounting Grounding Springs ............................................... 6
6.
Mounting Doors ..................................................................... 7
7. Trade-marks .......................................................................... 12
8.
Contact Information ............................................................. 12
