Page 14 of 29
© 2017 CommScope, Inc. All Rights Reserved
An example to attach the UMB to the pedestal
infrastructure is shown below. Use local practice to mount
he UMB to the pedestal infrastructure.
9.4.
Pole-mounting
Pole-Mounting (aerial) – The indexing terminal may be
mounted on a utility pole. The UMB may be attached to
the pole with lag screws or construction screws.
Also metal straps can be used to mount the UMB to a
pole, for instance in case of a metal pole.
FLAT BRACKET MOUNT
#8-16 X 1/2 INCH
THREAD ROLLING
SCREWS FOR PLASTIC
CAPPED HOLES
METAL STRAPS
USE CENTER HOLES
WHEN SECURING UMB
WITH LAG SCREWS
1/4 X 1-1/2 INCH
LAG SCREWS
USE SIDE HOLES
WHEN SECURING
UMB WITH
CONSTRUCTION
SCREWS
#10 X 1 INCH SELF
TAPPING SCREWS