9
5.1 Remove the protection from the gel block and open the gel block.
Position the open gel block between the cables. Leave ± 2 cm between
the gel block and the cable attachment plate.
4.4.12 Cut the looped fiber, use transportation tube to route the fiber to
the trays. For the length of the tube, route the tube from the basket to the
tray, mark and cut.
5.2 Before closing the gel block make sure it is clean. Insert the plugs in
the unused ports.
Remark: when installing the plugs be sure not to bend the crowns in the
gel block.
5 Installation of the gel block
Summary of Contents for FOSC-450-BS
Page 15: ...15 ...
