860481019
Instruction Sheet
www.commscope.com
Page 4 of 7
Install End Caps
Snap end caps into place
Panel
Rack
1. Snap end caps into place on panel as shown.
Step 1B – M2400A (Angled) Panel Installation
Install Panel on Rack
12-24 x ½” screws
19-inch equipment rack
M2400A panel
12-24 x ½” screws
1. Use four supplied 12-24 x ½” screws to secure panel to rack.
2. Connect cables to outlets per instructions provided with the individual outlets.