TECP-90-708 • Issue 5 • April 2017
Page 38
© 2017, CommScope, Inc.
3. If the frame has a splice chassis:
a. Remove the splice chassis cover (if present) from the bottom rear of the NG4access
frame, as shown in
Figure 36
. To do this, remove the two #8 pan head screws and two
star washers securing the cover to the frame. Set aside these items for re-installing the
cover later.
Figure 36. Removing Front Plate from Frame
b. Fully slide out the splice chassis (if present), as shown in
Figure 37
.
Figure 37. Sliding Out the Splice Chassis
251
3
7-A
REAR VIEW
OF FRAME
2516
8
-A
REAR VIEW
OF FRAME
