Overview organizer
The organizer is designed to receive cables and to store tubes and fibers as well as splice protectors and splitters.
The splice trays are designed with an inner width of
70 mm (2.75 Inches)
to store over length's of fibers and ensure a
minimum radius of
20 mm (0.79 Inches)
is respected when a U-turn of the fiber is required.
The loop storage basket for storing tubes has an inner width of
62 mm (2.44 Inches)
and the uncut 250µm fiber
storage basket for storing uncut feeder fibers has an inner width of
60 mm (2.36 Inches)
.
Note:
Verify up front if these bend radii are suitable for the intended application and the used fiber and tube type.
6
9
8
7
7
2
3
1
4
5
Rear side
Front side
1 Tray identification bar
2 Snap hooks
3 Rear tray with cover
4 Uncut 250µm fiber storage
5 Loop storage basket
6 Fiber guidance pen
7 Feeder cable strain relief holders/ interface plate
8 Branch cable strain relief holders/ interface plate
9 Port reducers
page 2 / 24
© 2021 CommScope, Inc. All Rights Reserved
