installation. Install wall plugs first, then position the mounting bracket against the surface. Continue with the
washers and the screws to secure the mounting bracket onto the surface.
Note:
Make sure the mounting bracket has the correct orientation (small holes facing upwards).
2 Secure the closure on the mounting bracket. Move the closure to the mounting bracket, bottom surface of the
closure on the same height as the bottom surface of the bracket. Then slide the closure downwards.
12.1.4
Pole mounting
1 Insert a (metal) strap through the openings on the mounting bracket as indicated. Attach the mounting bracket to
a utility pole, small holes facing upwards.
2 Secure the closure on the mounting bracket. Move the closure to the mounting bracket, bottom surface of the
closure on the same height as the bottom surface of the bracket. Then slide the closure downwards.
page 21 / 24
© 2021 CommScope, Inc. All Rights Reserved