ADCP-96-040 • Rev D • January 2018
Page 10
© 2018, CommScope, Inc.
Figure 8. Pole-Mount Installation
•
Strand-Mounting
(aerial) – A strand-mount bracket kit (MST-ACC-M02) is
available for aerial mounting the MST from an overhead strand as shown in
Figure 9
. The brackets mount on the UMB and are then clamped to the strand.
The MST snaps into the UMB.
Figure 9. Strand-Mount Installation
4.2
Installing the UMB and MST
The Universal Mounting Bracket (UMB) is included with each MST and is used for
mounting the MST. The UMB may be attached to various mounting surfaces using a
variety of fasteners as shown in
Figure 10
. Multiple holes and slots are provided in the
UMB to accommodate different fasteners including screws, nails, and cable ties.
Secure the UMB to the selected mounting surface using whatever fastening method is
preferred.
23165-A
23164-A