ADCP-96-040 • Rev D • January 2018 • Preface
Page ii
COPYRIGHT
© 2016, CommScope Inc.
All Rights Reserved
REVISION HISTORY
TRADEMARK INFORMATION
CommScope, CommScope (logo), ADC, ADC Telecommunications, Realflex, and OmniReach are trademarks.
OptiTap is a trademark of Corning Cable Systems Brands, Inc.
Channell is a trademark of Channell Commercial Corporation
Carson Industries is a trademark of Oldcastle Precast, Inc.
ProFORM is a trademark of Emerson Network Power, Energy Systems, North America, Inc.
Deltec is a trademark of Thomas & Betts International, Inc.
DISCLAIMER OF LIABILITY
Contents herein are current as of the date of publication. CommScope reserves the right to change the contents without prior notice.
In no event shall CommScope Inc. be liable for any damages resulting from loss of data, loss of use, or loss of profits and
CommScope Inc. further disclaims any and all liability for indirect, incidental, special, consequential or other similar
damages. This disclaimer of liability applies to all products, publications and services during and after the warranty period.
This publication may be verified at any time by contacting CommScope’s Technical Assistance Center using the following URL:
http://www.commscope.com/SupportCenter
.
ISSUE
DATE
REASON FOR CHANGE
1
07/2005
Original release
2
03/2006
New product references and additional product information
3
11/2008
Release of 4x3 MST and universal mounting bracket
4
05/2011
Updated to include the Rapid MST and rebranding information
5
July 2016
Updated to CommScope format.
Rev D January 2018
Part number (MID) changed on front cover; customer support information replaced with URLs.