CommScope OSP-CLPFEC-LG, Installation Instructions Manual

ADCP-93-080 • Rev B • April 2018

Page 2

© 2018, CommScope, Inc.

1 GENERAL

The Three Tier Clamp kit (OSP-CLPFEC-LG) is designed for use in the Fiber Entrance 

Cabinet (FEC). The FEC uses a water resistant grommet with three cutouts to

accommodate multiple and various sized cables in each entry port. The OSP-

CLPFEC-LG kit covers cable with outside diameters from 0.80 inch to 1.2 inches (20

mm to 30 mm). 

Table 1

 lists the kit components.

Table 1. OSP-CLPFEC Kit Components

ITEM

QUANTITY

Split Grommets (0.80, 0.90, 1.00 and 1.10 inch)  3 each size

Clamp Yokes

6

Male/Female bolt

6

Spacer bracket

2

The OSP-CLPFEC LG kit uses special male/female bolts and spacer plates to provide 

for three tier stacking. Male/female bolts thread into each other to accomplish the 

stacking. The spacer plates have two cutout slots the size of the bolt head. The 

slots keep the bolts from turning as the next bolt is threaded into it.

Figure 1

 shows the kit components in an exploded view.

SPACER

BRACKETS

CLAMP
YOKES

MALE/FEMALE

BOLTS

9662-A

Figure 1. Three-Tier Cable Clamp Exploded View

Figure 2

 shows the kit components in the configurations used for one, two, and

three cables per entry port.