ADCP-92-309 • Issue 4 • July 2016
Page 3
© 2016
CommScope
. All Rights Reserved.
1
SPECIFICATIONS
Specifications for the chassis are listed in
Table 1
.
2
UNPACKING AND INSPECTION
Unpack and inspect the various components as follows:
1. Inspect the exterior of the shipping container(s) for evidence of rough handling that may
have damaged the components in the container.
2. Unpack each container while carefully checking the contents for damage and verify with
the packing slip.
Caution: When mounting equipment in the rack make sure mechanical loading is even to avoid
a hazardous condition, such as loading heavy equipment in the rack unevenly. The rack should
safely support the combined weight of all equipment it supports.
Caution: Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch
circuit (e.g. use of power strips).
Caution: This equipment is to be installed only in Restricted Access Areas (dedicated
equipment rooms, equipment closets, etc.) in accordance with Articles 110-16, 110-17, and 110-
18 of the National Electrical Code, ANSI/NFPA 70.
Table 1. Network Chassis Specifications
PARAMETER
SPECIFICATION
REMARKS
Power
Voltage
36–57 VDC nominal
Input Current
270mA maximum (per IEEE 802.3af)
At 48 VDC
Environmental
Operating Conditions
+14
F to +140
F (
10
C to +60
C) 5% to 95% RH
No Condensation
Storage Conditions
40
F to +158
F (
40
C to +70
C) 10% to 95% RH
No Condensation
Mechanical
Dimensions D x W x H
13.35 in (33.9 cm) D
x
19.01 in (48.29 cm) W x
1.7 in (4.32 cm) H
1RU chassis
13.35 in (33.9 cm) D
x
19.01 in (48.29 cm) W x
3.45 in (8.73 cm) H
2RU chassis
13.35 in (33.9 cm) D
x
19.01 in (48.29 cm) W x
6.95 in (17.65 cm) H
4RU chassis
Weight
4.1 lb. (1.86 kg.)
Empty 1RU chassis
5.3 lb. (2.40 kg.)
Empty 2RU chassis
6.8 lb. (3.08 kg.)
Empty 4RU chassis
