background image

SYSTIMAX 360

 iPatch

®

 PATCHMAX

®

 Modular Panel

Instruction Sheet

Material ID 860 489 905
Issue 1, August 2010

ACN 107 198 425

The iPatch System is covered by U.S. patents 6285293 and 6522737,
and other U.S. and foreign patents and patents pending.

The SYSTIMAX 360™ iPatch

®

 PATCHMAX

® 

Modular 

Panel is a SYSTIMAX approved product. This patch 

panel can be used in an iPatch System for EIA-T568A or 

EIA-T568B wiring applications. The 24-port version 

holds four GS3-DM or GS5-DM 6-pack modules and the 

48-port version holds four 12-pack modules. Both 

versions are two units high and mount in a standard 

19-inch rack with a universal hole pattern. Integrated 

patch cord management and removable rear cable 

management are included.

Ordering information is listed below.

Note: 

To use the SYSTIMAX 360 iPatch PATCHMAX Modular Panel 

in an existing iPatch System, the iPatch Managers must be running 
software version 7.20N or later. The System Manager software, used 
to manage the system, must be Version 6.5 or later. 

We recommend 

that you upgrade the System Manager software to Version 6.5 or a 
later version before you install the SYSTIMAX 360 iPatch 
PATCHMAX Modular Shelf.

 System Manager will automatically 

upgrade the iPatch Manager software.

Components in this Package

ƒ

Modular panel with the following items installed:

— GS3-DM or GS5-DM 6-pack or 12-pack modules (4)
— cabling labels for B wiring (4 or 8)
— iPatch sensor overlay (1 or 2)
— panel bus jumper (1 or 2)

ƒ

Patch cord management

ƒ

Front bezel

ƒ

Cable support bar

ƒ

Cable troughs (4)

ƒ

Cable straps (4)

ƒ

#12-24 x 1/2 inch screws (4) for mounting the panel in a 
19-inch (482.6 mm) rack

ƒ

Cabling labels for A wiring (4 or 8)

ƒ

Termination Managers (28 or 56) and instruction sheet

Related Components (Ordered Separately)

Material ID

Product Code

Description

760123489

360-iP-PMAX-GS3-24

360 iPatch PATCHMAX 24-port panel 
equipped with GS3-DM 6-pack modules

760123497

360-iP-PMAX-GS5-24

360 iPatch PATCHMAX 24-port panel 
equipped with GS5-DM 6-pack modules

760130377

360-iP-PMAX-GS3-48

360 iPatch PATCHMAX 48-port panel 
equipped with GS3-DM 12-pack 
modules

760130385

360-iP-PMAX-GS5-48

360 iPatch PATCHMAX 48-port panel 
equipped with GS5-DM 12-pack 
modules

760130419

360-iP-UP-KIT-PMAX-24 360 iPatch PATCHMAX 24-port upgrade 

(for 10 panels)

760130427

360-iP-UP-KIT-PMAX-48 360 iPatch PATCHMAX 48-port upgrade 

(for 5 panels)

760149096

360-iP-JMPR-PMAX

360 iPatch PATCHMAX Cable Bus 
Jumpers (10 jumpers)

Material ID

Product Code

Description

760102269

360-PM-GS3-DM

360 PATCHMAX GS3-DM replacement 
distribution 6-pack module

760111393

360-PM-GS5-DM

360 PATCHMAX GS5-DM replacement 
distribution 6-pack module

760117382

360-PM-GS3-DM-12P

360 PATCHMAX GS3-DM replacement 
distribution 12-pack module

760117390

360-PM-GS5-DM-12P

360 PATCHMAX GS5-DM replacement 
distribution 12-pack module

Summary of Contents for SYSTIMAX 360 iPatch PATCHMAX







Reviews: